Throttle Control

Extrudabody offers a full complement of products to connect our Throttle Bodies to your gas pedal.  Our ITB systems include Throttle Cams, Stops, and Shaft Couplings.  Throttle Cables and Hardware are available separately.

Throttle Cam

• Our Cams allow for 3 attachment points for Throttle Cables and 5 locating pin holes for connection to the Throttle Stop.  These features allow for a high degree of flexibility to ensure that you can

Throttle Lever

• The Throttle Lever is an optional part that can be useful to supplement the standard throttle return spring.  The long and short arms can be connected to carb-style return springs to fine tune your pedal feel and/or overcome high throttle cable and pedal resistance.
• Note that return springs are not included, but any auto parts store carries assortments of carb return springs at a marginal cost.  Also, you will need to secure this return spring to your engine or manifold.

Throttle Stop

• Throttle Stops allow for idle speed adjustment and link to throttle return springs

Throttle Shaft Coupling

• Our couplings are designed to flex to allow for minor misalignment between ITBs

Throttle Cables

• Our Throttle Cables are available in both standard lengths that can be used as-is, or cut-to-length
• Cables are Teflon coated
• Cable outers are stainless braid look with Teflon lining
• A 90 Degree Adjuster is availble to help navigate tight engine bays

Throttle Cables Explained (Click Here For a Larger Diagram)

: